E12 Egro — Boiler Overpressure / Safety Valve Release
At a glance
- Severity
- FAULT STOP
- Domain
- ESPRESSO_MACHINE_SYSTEM
- Reference standard
- PED 2014/68/EU - Pressure Equipment Directive
- Product / context
- Overpressure steam boiler (NEXT)
What it means
The boiler safety valve has opened, releasing steam because the internal pressure exceeded the set limit (typically 1.8-2.0 bar for the steam boiler). The regulation pressurestat did not cut off heating at the set value.
Probable causes
- Regulation pressurestat faulty with contacts welded in the closed position.
- Heating element permanently energized due to relay fault on the board.
- Safety valve with weakened spring opening at too low a pressure.
- Massive limescale in the boiler reducing the usable volume and increasing pressure.
Where to start
Check the steam boiler pressure gauge. What was the reading before shutdown? Is the regulation pressurestat calibrated correctly (typically 1.2-1.4 bar)?
Full guided diagnosis in the app
The diagnostic tree for this fault has 6 guided steps with measurements, checks and resolutions. You'll find it in HorecaIQ, one of the four IndexOS apps: free, works offline.
Printable sheet + Egro updates
Leave your email: get the link to the printable Egro error-code sheet and a heads-up when we add new codes and guides.
Double opt-in, zero spam, one-click unsubscribe.
The same fault on other brands
More Egro codes
- E02-E08 — Internal Power Supply Missing or Short Circuit (5 V / 12 V / 24 V)
- E09/E10 · W25 — Boiler Heating Timeout / Temperature or Pressure Not Reached
- E13/E14 — Brew Group Piston Movement Error (Superautomatic)
- E15 · W39/W61/W80 — Board Communication Fault / External Boards Not Responding
- W07 — Group Head Dispensing Timeout / Flowmeter Error
- W08-W24 — Solenoid Valve Line — Interruption or Short Circuit
- W26-W28 — Espresso Boiler/Group Probe Fault — Short Circuit or Open Circuit
- W30 — Steam Wand No Output / Low Steam Pressure